Filters for dust extraction
We can also provide estimates for suction filters dust
Read MoreAppliances and wires for metallizing sold by Colimet
Equipment multi use with a wide range of drive sprinkles Zn and Al. In a few minutes can be adapted to spray other solid wire or cored. It consists of: gun uses standard multi LD/U-2; push feeder on the console and engine of the gun pushing the wire in sync for a maximum length of 12 m fino […]
Read MoreEquipment electric arc specific to the industry of molds consisting of portable generator 130 A control unit with, filo in bobine, cables and pipes 2,5 m, push feeder sul generatore, Balanced lightweight gun with nozzles open or closed. Technical data: Operation to 100%: a 130 A, 28 In 400 In, 50 cycles, 4,6 […]
Read MoreThe robotic gun can be of two types: LD / U-2 and LD EM / U-2 EMD gun arranged for integration of existing production lines or adapt robot. The gun is robust to withstand even heavy operations. The complete isolation of both electrodes makes impossible any contact in the gun body caused by dragging, abrasion […]
Read MoreUsed with generators 200-300-400 A gun is the best-selling. Equipped with spray nozzles open or closed threads can give 1,6 – 2,0 – 2,5 mm. Although light gun is very robust and withstands heavy working conditions. A powerful motor ensures high torque and reliable power. Easy to maintain, All components can […]
Read MoreMobile or fixed equipment to spray Zn and Al at very high speeds. The gun is placed on a static or robot. Technical data: operation to 100% The 600/800/1200/3000A 400V, 50 cycles (other voltages on request) Maximum speed spraying: ZN ca.60/80/120/300 Kg / h ca. 16/24/37/90 At Kg / h Required air: between 1100 – 1300 ITRS. / Min.
Read MoreFilters for dust extraction, generated by the electric arc, Osu-Hessler
Read Moregalvanizing plant spray OSU Hessler 300 A Push-Pull, anti-corrosion. Our guns have no moving parts and components. The only components that are subject to wear are the contact tubes (nozzles) that they have a long-lasting because they are made of copper alloy "additive" resistant to high temperatures dell 'electric arc. The light pisola […]
Read MoreThreads according to DIN EN ISO wires provided by Vertic Zinc Wire Oy are thoroughly inspected and products with the system of the continuous casting in vertical which ensures a perfect calibration and thorough cleaning of the wire prototto. Oils for electrical contacts to lubricate the threads and get a perfect electrical contact and […]
Read MoreFlame Spraying: 20-24 kg / h of di Zn 6-8 kg / h of Al Suitable for spraying zinc wire and aluminum 2,5 mm a 3,16 mm. The gun, perfectly balanced, It reduces operator fatigue and, although light, It is extremely robust to withstand heavy working conditions. Equipped with a high oxygen capacity system […]
Read Morelightweight gun perfectly balanced and ideal for spraying Zn and / or aluminum molds and parts that need to be protected against corrosion. And’ It equipped with a powerful human DC motor or air motor to spray Cu, Inox, Mo, etc., connected to the transformer by means of a push-feeder. The wires are transported to the […]
Read MoreOSU – Hessler 300 A antibodies to spray Zn, Aluminum and their alloys. Consisting of: ANTICOR compact lightweight gun with a powerful motor in the handle, open nozzles can spray wire dia 2 and 2,5 mm. Perfectly balanced reduces fatigue and complies with the latest safety standards. A special push feeder on the console […]
Read Moregas galvanizing plant for spray Zn or Al. Compost0 from: Pistola AC 2000 Robust motor with power wire and compressed air nozzle systems acetylene-oxygen for wire dia 2,5 3 mm e 1/8″ and 3/16″; tripod to support wire coils; system control and regulating air; hose set of 5 m […]
Read MoreOSU – Hessler 200 A LD/U-2 For industrial applications, restore worn parts, facings on defective parts, anticorrosive coatings. Consisting of: generator on wheels, with integrated internal controls, dispenser wire coils, cables and hoses 3,5 m, LD/U-2 gun with nozzles capable of spraying wire dia 1,6- 2,0- 2,5 mm. Technical data: […]
Read MoreThe plant for the automatic spraying consists in: – Gun arranged for integration of existing production lines or to adapt robot. The gun is robust to withstand even heavy operations. The complete isolation of both electrodes makes impossible any contact in the gun body caused by dragging, abrasion of the wires or by […]
Read MoreOsu-gun Hessler 400 A ANTICOR Gun (weight 2,5 Kg ca.) It is equipped with a closed or open system nozzles below the diameter of tension 2,3 mm and an air-atomization system designed specifically for spraying zinc. The gun is connected to the pull-feeder placed on the generator console from a set […]
Read MoreThe robotic gun can be of two types: LD / U-2 and LD EM / U-2 EMD gun arranged for integration of existing production lines or adapt robot. The gun is robust to withstand even heavy operations. The complete isolation of both electrodes makes impossible any contact in the gun body caused by dragging, abrasion […]
Read MoreFlame Spraying: 20-24 kg / h of di Zn 6-8 kg / h of Al Suitable for spraying zinc wire and aluminum 2,5 mm a 3,16 mm. The gun, perfectly balanced, It reduces operator fatigue and, although light, It is extremely robust to withstand heavy working conditions. Equipped with a high oxygen capacity system […]
Read MoreThe plant for the automatic spraying consists in: – Gun arranged for integration of existing production lines or to adapt robot. The gun is robust to withstand even heavy operations. The complete isolation of both electrodes makes impossible any contact in the gun body caused by dragging, abrasion of the wires or by […]
Read MoreOsu-gun Hessler 400 A ANTICOR Gun (weight 2,5 Kg ca.) It is equipped with a closed or open system nozzles below the diameter of tension 2,3 mm and an air-atomization system designed specifically for spraying zinc. The gun is connected to the pull-feeder placed on the generator console from a set […]
Read Morelightweight gun perfectly balanced and ideal for spraying Zn and / or aluminum molds and parts that need to be protected against corrosion. And’ It equipped with a powerful human DC motor or air motor to spray Cu, Inox, Mo, etc., connected to the transformer by means of a push-feeder. The wires are transported to the […]
Read MoreFilters for dust extraction, generated by the electric arc, Osu-Hessler
Read MoreMobile or fixed equipment to spray Zn and Al at very high speeds. The gun is placed on a static or robot. Technical data: operation to 100% The 600/800/1200/3000A 400V, 50 cycles (other voltages on request) Maximum speed spraying: ZN ca.60/80/120/300 Kg / h ca. 16/24/37/90 At Kg / h Required air: between 1100 – 1300 ITRS. / Min.
Read MoreThreads according to DIN EN ISO wires provided by Vertic Zinc Wire Oy are thoroughly inspected and products with the system of the continuous casting in vertical which ensures a perfect calibration and thorough cleaning of the wire prototto. Oils for electrical contacts to lubricate the threads and get a perfect electrical contact and […]
Read Moregas galvanizing plant for spray Zn or Al. Compost0 from: Pistola AC 2000 Robust motor with power wire and compressed air nozzle systems acetylene-oxygen for wire dia 2,5 3 mm e 1/8″ and 3/16″; tripod to support wire coils; system control and regulating air; hose set of 5 m […]
Read Moregalvanizing plant spray OSU Hessler 300 A Push-Pull, anti-corrosion. Our guns have no moving parts and components. The only components that are subject to wear are the contact tubes (nozzles) that they have a long-lasting because they are made of copper alloy "additive" resistant to high temperatures dell 'electric arc. The light pisola […]
Read MoreEquipment multi use with a wide range of drive sprinkles Zn and Al. In a few minutes can be adapted to spray other solid wire or cored. It consists of: gun uses standard multi LD/U-2; push feeder on the console and engine of the gun pushing the wire in sync for a maximum length of 12 m fino […]
Read MoreOSU – Hessler 300 A antibodies to spray Zn, Aluminum and their alloys. Consisting of: ANTICOR compact lightweight gun with a powerful motor in the handle, open nozzles can spray wire dia 2 and 2,5 mm. Perfectly balanced reduces fatigue and complies with the latest safety standards. A special push feeder on the console […]
Read MoreUsed with generators 200-300-400 A gun is the best-selling. Equipped with spray nozzles open or closed threads can give 1,6 – 2,0 – 2,5 mm. Although light gun is very robust and withstands heavy working conditions. A powerful motor ensures high torque and reliable power. Easy to maintain, All components can […]
Read MoreOSU – Hessler 200 A LD/U-2 For industrial applications, restore worn parts, facings on defective parts, anticorrosive coatings. Consisting of: generator on wheels, with integrated internal controls, dispenser wire coils, cables and hoses 3,5 m, LD/U-2 gun with nozzles capable of spraying wire dia 1,6- 2,0- 2,5 mm. Technical data: […]
Read MoreEquipment electric arc specific to the industry of molds consisting of portable generator 130 A control unit with, filo in bobine, cables and pipes 2,5 m, push feeder sul generatore, Balanced lightweight gun with nozzles open or closed. Technical data: Operation to 100%: a 130 A, 28 In 400 In, 50 cycles, 4,6 […]
Read More